Transparent (1-coat): Apply a thin coat with a lint-free cloth.
Intensive (2-coats): Apply two thin coats with a lint-free cloth.
Apply two thin coats with an Osmo Floor Brush or Osmo Natural Bristle Brush for smaller areas.
WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container
Apply two thin coats with an Osmo Microfibre Floor Roller.
Tip: The microfiber roller should only be saturated lightly. A lightly saturated roller will allow the user to cover approximately 43-53 ft2 (4-5m2) of flooring. Please be aware that Osmo Wood Wax Finish has a high yield (see product label). Product excesses and roller tracks must be roller or smoothed out immediately.
Apply one thin coat with an Osmo FloorxCenter or floor-buffing machine.
Tinting: Osmo Wood Wax Finish can also be used to lightly tint Polyx®-Oil 3054 up to a ratio of 10:1. Do not exceed a ratio of 10 parts Polyx®-Oil 3054 to 1 part Wood Wax Finish.