Hosco

This brass fret setter allows you to insert frets into the fingerboard concisely, and without damage to the frets themselves. While you can use any...

The Easy Fret Care Kit provides luthiers, techs, and musicians a quick and easy way to keep your frets looking top notch. The Fret Care Sheet is de...

The Easy Fret Care Kit provides luthiers, techs, and musicians a quick and easy way to keep your frets looking top notch. The Fret Care Sheet is de...

0.60 mm thick Fret slotting saw. 120mm long blade, 1.25mm tooth spacing and 180mm handle. High quality, made in Japan.

0.57 mm thick Fret slotting saw. 120mm long blade, 1.25mm tooth spacing and 180mm handle. High quality, made in Japan.

0.53 mm thick Fret slotting saw. 120mm long blade, 1.25mm tooth spacing and 180mm handle. High quality, made in Japan.

High quality HSS (high speed steel) bit 2 step hole: 7.0 mm (0.275”), and 8.6 mm (0.34”) High quality, made in Japan.

Dual loading, can accept strings through guitar, or can load from bottom of the bridge. Chrome Finish. Mounting hardware is included. High quality...

Back plate for Stratocaster guitars, Black. Screws are not included.

Back plate for Stratocaster guitars, White. Screws are not included.

3 Ply Black PVC LP Style Pickguard Made in Japan.

One piece - Medium fretwire, great replacement for Gibson® guitars. Highest quality of Nickel-silver with HV-175 Hardness. Length 500mm (19.75") --...

Kovax Finish Repair Paper Abrasives Great for repairing finish. Each sheet is 70mm x 114mm, and is divided into 8 smaller squares for perfect spot ...

Rock Maple Neck + Indian Rosewood Fingerboard for Tele 21 Frets. Half-paddle neck, Sanded, shaped, inlaid and fretted, Unfinished * nut not includ...

Shielded Circuit Wire for Electric Guitars, 3 Conductor Each piece is 39" (1m) long High quality, made in Japan.

Lead Wire, Circuit Wire for Electric Guitars, 26 Gauge 39" long (1m) each piece High quality, made in Japan.

3 Piece Masking Tape Set 1 Roll Each: 20mm, 12mm, 6mmLow Tack - Great to use for masking off fingerboard for fretwork. High quality, made in Japan.

Bronze Fretting Hammer, 300mm long, 115 grams, with wooden handle. High quality, made in Japan. Both small convex faces can hit frets as a point a...

Compact Fret Crown File File length 100mm.High quality, made in Japan. Small (Blue) Radius = 1mm Medium (Yellow) Radius = 2mm Large (Red) Radius = ...

Black Top hat volume and tone knobs with metal top. Numbers are molded into the plastic, not painted. Select Volume or Tone, 18-spline metric (Alph...

Acrylic Brown Tortoise round position markers, 10 piece pack. Sizes available: 3mm, 4mm and 6mm. Premium quality, made in Japan.

Set of 2 pre-bent Black / White Herringbone Purfling. Select from Folk, Classical and Dreadnought sizes. * Note * Dimensions may vary, as these it...

** CANNOT BE SHIPPED TO USA ** 10 piece pack. Sizes available: 2mm, 3mm, 4mm, 5mm, 6mm and 7mm diameter. All Abalone position markers are 2mm thick...

** CANNOT BE SHIPPED TO USA ** 10 piece pack. Sizes available: 2mm, 3mm, 4mm, 5mm, 6mm diameter. All Mother of Pearl position markers are 2mm thick...

Polyester Film 0.0473uf Tone Capacitor. This cap is commonly used with single coil pickups. Voltage 200 VDC, Tolerance 5%, Case length 0.28". High ...

Chrome short bridge with compensated saddles for Telecaster style guitars, used in guitars fitted with Humbucker pickup at bridge position. The sad...

One Yellow Tortoise celluloid piece 1.4mm thick x 7mm wide x 1400mm long (0.055" x 0.276" x 55") High quality, made in Japan.

Flat Top Knob for 6mm shaft, Gold finish, with textured grip and slotted-head set screw. For use on Fender models, including Tele®, Duo-Sonic , Mus...

One piece 1.5 mm thick x 6 mm wide x 1700 mm long (0.059" x 0.236" x 66.92") High quality, Made in Japan.

A perfect tool for guitarists ! This Cube Nut Wrench works great for a variety of tasks: 3 hex wrenches for adjusting tuner nuts of various sizes (...

Rock Maple Stratocaster® 22 Frets Guitar Neck with Trusrod and Walnut stripe Half-paddle neck, Sanded, shaped, inlaid and fretted, Unfinished * nu...

Rock Maple Neck + Indian Rosewood Fingerboard for Stratocaster® 22 Frets. Half-paddle neck, Sanded, shaped, inlaid and fretted, Unfinished * nut ...

Alpha potentiometers are famous for their high reliability and reasonable prices. 250K, Mini 16mm diameter, aluminium split shaft for 18-spline (me...

Alpha potentiometers are famous for their high reliability and reasonable prices. 250K, Standard 24mm diameter, aluminium split shaft for 18-spline...

1 Edge-Cut Nut file. 12.5mm width, 95.5mm length, works well with our Aluminum Mag-Holder. High quality, made in Japan.

We recommend to use these for stainless fretwire cutting. Requires less effort to cut thanks to longer handles. This works for fret wires, as well ...