Skip to content
Laguna Revo 15|24 Lathe, Variable Speed, 1.5HP (110V)

Laguna Revo 15|24 Lathe, Variable Speed, 1.5HP (110V)

SKU: LGN-1524
Availability:
1 in stock, ready to be shipped
$2,336.31 - $2,336.31
$2,336.31
$2,336.31 - $2,336.31
$2,336.31
With the launch of the Revo 15|24 Laguna is filling the gap between the Revo 12|16 & the legendary Revo 18|36, providing space constrained users with more power and capacity. The Laguna 15|24 REVO lathe provides more power and capacity in a constrained space while plugging into a standard 110V outlet (15 Amp service required).

The headstock, banjo and tailstock are fully removable from the bed. The tailstock features on-board tool storage for the live center and drive center (included). A tool shelf mounts to the left of the headstock with storage for the knockout bar and other lathe tools.

The headstock can be repositioned to the tail end of the bed for outboard turning. The optional 20 extension (item #172165, sold separately) can expand your outboard turning options.

A 24-position indexing plate allows the headstock to rotate in 15 increments. The headstock and tail stock accept an MT2 taper.

The PWM (Pulse Width Modulation) motor utilizes transistors for fast communication between the motor and controller. PWM controls stabilize the RPM and provide consistent torque (voltage) when using speeds at low RPM so you can turn with confidence at any speed on the Laguna REVO 15|24 Lathe.

Features:

  • World-class fit and finish Laguna is known for
  • Sliding headstock for ergonomic outboard bowl turning
  • Infinite electronic variable speed from 50 4200 RPM with a 3 step pulley
  • Extraordinary torque even at low speeds, powered by Laguna Pulse Width Modulation
  • Adjustable-height legs allow a more ergonomic working position tailored to individuals needs
  • Steel bed provides strength, stability and a surface that the banjo will glide across smoothly
  • A brand new feature is the patent-pending Precise Point that allows you to dial in the tailstock quill to meet with the headstock center.

Specifications:

  • Electrical: 1.5HP, 110 Volt, 8 Amp, 60Hz.
  • Motor: Permanent Magnet DC, 2150 RPM
  • PWM: Pulse Width Module Speed Control
  • Recommended Breaker: 15 Amp
  • Spring Loaded Spindle Lock
  • Swing Over Bed: 15-½″
  • Swing Over Banjo: 11-3/32″
  • Max. Outboard Swing with optional accessory: 25″
  • Tool-Rest Post Size: 1″
  • Tool-Rest Length: 12″
  • Bed Gap: 50mm
  • Spindle Taper: MT#2
  • RPM High: 650-4200
  • RPM Mid: 325-2100
  • RPM Low: 50-650
  • Accepts Vacuum Chuck: No
  • Tailstock Quill: #2 MT
  • Floor To Spindle Center Low: 36-13/32″
  • Floor To Spindle Center High: 51-13/32″
  • Floor To Bed Min.: 25-19/32″
  • Floor To Bed Max.: 43-19/32″
  • Front Bearing: TPI Taiwan 6206LLU
  • Rear Bearing: TPI Taiwan 6205LLU
  • Spindle Index #: 24 w/ Lock
  • Distance Between Centers: 24
  • Headstock/Tailstock Through-Bore: ⅜″
  • Headstock Travel: Full Length
  • Tailstock Storage Of Centers
  • Spindle Size: 1-¼″ x 8TPI RH
  • Floor Space (W x D x H): 60″ x 22″ x 22″
  • CSA C/US: 256540
  • Box Dimensions (L x W x H): 52″ x 22″ x 22″
  • Weight (Net/Ship): 288/302 lbs